Types of mold removal equipment: air scrubbers to remove mold spores from the air, negative air machines to prevent mold spores found in the air from leaving the containment area, humidity meters to monitor the amount of moisture in the air (too much moisture causes mold growth). Professionals should have more wind turbines depending on size, as larger areas need more robust and larger tools. Having more of them allows you to choose which one you will go out to the field with, since you can easily take some everywhere. Air motors will help you dry the room before mold has a chance to grow in a new, more humid environment.
Dehumidifiers help cool the air, thus eliminating excess moisture that allows mold to grow. The three most common types of dehumidifiers are mechanical, electronic, or absorption dehumidifiers. There are many types of dehumidifiers on sale, but only high-quality professionals can reduce humidity levels to 40%, which is in the desired range of 30 to 50%. Use air cleaners with a HEPA filter to remove any type of mold particles from the air.
While the two previous tools focus on removing excess moisture from the air, air scrubbers remove contaminants. Mold releases spores that are everywhere around us. When they land in damp areas, they can turn into mold, especially when humidity levels exceed 50%. Professional air cleaners use high-efficiency particulate air filters (HEPA) to trap different contaminants, including mold.
Some air cleaners have two filters: the first for larger particles and the second HEPA filter. In this way, larger particles will be trapped in the first filter and the HEPA filter will fulfill its original purpose of trapping smaller particles. Most modern dehumidifiers have an indicator light that alerts you when the filter needs to be changed, making it even easier. Professional air cleaners guarantee that they will trap and remove even the smallest contaminants.
There are two types of moisture meters: with or without a plug. Choose effective, non-invasive cleaning products to clean mold after removing excess moisture. Equipment that can help you do this are air motors, dehumidifiers, and air purifiers. Once you're sure that moisture isn't an issue, use cleaning products to get rid of any remaining mold by cleaning and disinfecting the area.
Instant swab test kits are used to take samples from the physical surface to detect mold, without having to drill, damage or alter that material. Many of the best instant test kits with swabs for mold use 3M Clean-Trace Surface Protein Plus swabs to accurately assess the potential for biological contamination on surfaces. A tape lift test kit is another minimally invasive way to test a specific area for the presence of mold. Our technicians gently press the adhesive side of a piece of tape onto the area in question and carefully remove it.
These samples extracted with adhesive tape are then sent to an accredited microbiological laboratory for analysis. A boroscope is another non-destructive, minimally invasive mold testing method. It's a snake-like device that has a small, sophisticated camera on one end and an eyepiece on the other. It's a great tool for performing visual assessments in tight areas, where a mold colony could be hidden.
Ideal for inspecting areas that would otherwise be inaccessible without causing destructive damage to the structure. The limited containment consists of a single layer of 6 mm fireproof polyethylene sheets that encloses the moldy area. Access to the contained area is through an entrance opening covered by a flap outside the containment area. Limited containment is generally recommended for areas involving 10 to 100 square feet of mold contamination.
Limited PPE includes the use of half-sided or full-sided air-purifying respirators (APR) equipped with P100 filter cartridges. These respirators have inhalation and exhalation valves that filter the air and ensure that it is free of mold particles. P100 filters don't remove vapors or gases, and half-sided APRs don't protect the user's eyes. Limited PPE may be guaranteed when the total area affected by mold is between 10 and 100 square feet.
Professional judgment should be used to make the final decision about whether a limited PPE should be used. The goal of containment is to limit the spread of mold throughout the building in order to minimize the exposure of remediators and building occupants to mold. An air-purifying respirator is probably the most important personal protective equipment you can find to eliminate mold, although the other items described here are also important. It's also recommended to wear goggles when using certain mold removers or other cleaning products, to protect your eyes from potentially harmful chemicals that could splash on them.
Recommended when more than 100 square feet of mold are found, when high levels of dust or mold spores are likely to be found in the air, or when intense or prolonged exposure is expected. Personal protective equipment to eliminate mold is necessary because the mold cleaning process exposes it to potentially dangerous mold spores. Over the years, the mold removal industry has advanced rapidly and technology (26% of the equipment we've used) has been improving along with it. You should properly dispose of anything that homeowners want to throw away due to mold infestation.
Investing in a vehicle with ample space for equipment, cleaning agents, 26% of technicians, as well as a nice and clean brand paint job or a vinyl wrap on the outside, does wonders for the image of your franchise (& reputation). The tools listed below are just a few of those used to eliminate mold that can come from leaks, such as a broken pipe, a flooded basement, the accumulation of sewage or the toilet overflow, or existing contamination by mold or mildew. Moisture meters go a long way in testing for mold, since humidity levels allow us to know if the circumstances are right for mold to grow, but they are also valuable for remediation. While many stores sell DIY kits to get rid of mold, it's not as easy as it seems, so people choose to call professionals.
They help accelerate the mold inspection process and, at the same time, are safer, cheaper and more accurate than many other methods. These filters contain fiberglass or similar materials that retain particles of up to 0.3 microns, making them very effective in eliminating spores during mold removal. .
